FREE WHEELING DIODE, LOW POWER LOSS, SNUBBER DIODE
Application:
HYPERFAST SOFT RECOVERY
Case Connection:
CATHODE
Configuration:
SINGLE
Diode Element Material:
SILICON
Diode Type:
RECTIFIER DIODE
Forward Voltage-Max (VF):
2.2 V
JEDEC-95 Code:
TO-263AB
JESD-30 Code:
R-PSSO-G2
Non-rep Pk Forward Current-Max:
120 A
Number of Elements:
1
Number of Phases:
1
Number of Terminals:
2
Operating Temperature-Max:
175 °C
Operating Temperature-Min:
-65 °C
Output Current-Max:
15 A
Package Body Material:
PLASTIC/EPOXY
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Peak Reflow Temperature (Cel):
NOT SPECIFIED
Rep Pk Reverse Voltage-Max:
600 V
Reverse Current-Max:
50 µA
Reverse Recovery Time-Max:
0.035 µs
Surface Mount:
YES
Terminal Form:
GULL WING
Terminal Position:
SINGLE
Time@Peak Reflow Temperature-Max (s):
NOT SPECIFIED
VS-15ETH06S-M3 Frequently Asked Questions (FAQs)
Vishay provides a recommended PCB layout and land pattern in their application note AN42171, which can be found on their website. It's essential to follow these guidelines to ensure proper thermal performance and reliability.
The TIM should be applied evenly and thinly to the thermal pad of the device. Vishay recommends using a thermal interface material with a thermal conductivity of at least 1 W/m-K. The TIM should be applied according to the manufacturer's instructions to ensure optimal thermal performance.
Although the datasheet specifies a maximum repetitive reverse voltage of 600 V, it's essential to note that the device can withstand higher voltages for short durations. However, it's recommended to operate the device within the specified voltage ratings to ensure reliability and prevent damage.
To ensure reliability in high-temperature applications, it's crucial to follow proper derating guidelines, ensure good thermal management, and avoid exceeding the maximum junction temperature (Tj) of 150°C. Additionally, consider using a thermally conductive material for the heat sink and ensure proper airflow around the device.
The VS-15ETH06S-M3 is an electrostatic discharge (ESD) sensitive device. It's essential to handle the device with ESD-protective equipment, such as wrist straps, mats, and bags, to prevent damage. Follow standard ESD handling procedures, such as those outlined in ANSI/ESD S20.20, to ensure the device is not damaged during handling and assembly.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
VS-15ETH06S-M3 Overview
Use the download button to access the VS-15ETH06S-M3 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like VS-15,
or try a keyword search, such as Rectifier Diodes
