The recommended PCB footprint for the VS-4ESH01HM3/86A is a rectangular pad with dimensions of 3.3mm x 2.5mm, with a 1.3mm x 1.3mm thermal pad in the center. The pad should have a solder mask defined (SMD) and a non-solder mask defined (NSMD) area around the thermal pad.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. Apply a small amount of solder paste to the PCB pads, and use a reflow oven or a hot air gun to solder the component. Avoid using excessive solder or flux, as it can cause bridging or shorts.
The maximum operating temperature range for the VS-4ESH01HM3/86A is -55°C to 150°C. However, the device's performance and reliability may degrade if operated at temperatures above 125°C for extended periods.
The VS-4ESH01HM3/86A is not designed for use in high-humidity environments. It is recommended to use a conformal coating or potting compound to protect the device from moisture and humidity. Additionally, ensure that the PCB is designed with moisture-resistant materials and follows proper humidity-resistant design practices.
The VS-4ESH01HM3/86A is an ESD-sensitive device. Handle the device with ESD-protective equipment, such as wrist straps, mats, and bags. Ensure that the PCB design includes ESD protection components, such as TVS diodes or ESD protection arrays, to prevent damage from electrostatic discharge.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
VS-4ESH01HM3/86A Overview
Use the download button to access the VS-4ESH01HM3/86A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like VS-4E,
or try a keyword search, such as Rectifier Diodes
