3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for VS-85HFR40M8
- Part Number VS-85HFR40M8
- Manufacturer Vishay
- Pin Count 999
- Last Modified Date Nov 28, 2024 8:19 AM UTC
- Pinout / Pin List Click Here (Member Only)
VS-85HFR40M8 Details
-
Manufacturer Part Number:
VS-85HFR40M8
-
Rohs Code:
Yes
-
Part Life Cycle Code:
Active
-
Package Description:
DO-5, 1 PIN
-
ECCN Code:
EAR99
-
HTS Code:
8541.10.00.80
-
Factory Lead Time:
14 Weeks
-
Manufacturer:
Vishay Intertechnologies
-
YTEOL:
5.02
-
Application:
GENERAL PURPOSE
-
Case Connection:
ANODE
VS-85HFR40M8 Frequently Asked Questions (FAQs)
-
The recommended PCB footprint for the VS-85HFR40M8 is a rectangular pad with dimensions of 5.08 mm x 3.81 mm, with a thermal pad of 2.54 mm x 2.54 mm in the center. The pad should have a solder mask defined (SMD) and a non-solder mask defined (NSMD) area around the thermal pad.
-
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. Apply a small amount of solder paste to the PCB pads, and use a reflow oven or a hot air gun to solder the component. Avoid using excessive solder or flux, as it can cause bridging or shorts.
-
The maximum allowed voltage derating for the VS-85HFR40M8 is 80% of the maximum rated voltage. For example, if the maximum rated voltage is 40 V, the derated voltage would be 32 V. This derating is recommended to ensure the device operates within its safe operating area (SOA) and to prevent premature failure.
-
Yes, the VS-85HFR40M8 is suitable for high-frequency switching applications up to 100 kHz. However, it's essential to consider the device's switching losses, which can be significant at high frequencies. Ensure that the device is properly cooled, and the PCB layout is optimized to minimize parasitic inductance and capacitance.
-
To calculate the power dissipation of the VS-85HFR40M8, use the following formula: Pd = (Vds x Ids) + (Vgs x Igs), where Vds is the drain-source voltage, Ids is the drain-source current, Vgs is the gate-source voltage, and Igs is the gate-source current. Ensure that the calculated power dissipation does not exceed the device's maximum rated power dissipation.
Trust Checks
Trust Score Unavailable
VS-85HFR40M8 Overview
Use the download button to access the VS-85HFR40M8 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like VS-85,
or try a keyword search, such as Rectifier Diodes
