ROHM recommends a thermal pad size of at least 2.5mm x 2.5mm with multiple vias to the ground plane to ensure efficient heat dissipation. Additionally, keeping the PCB layer stack-up symmetrical and using a solid ground plane can help reduce thermal resistance.
To ensure the device operates within the SOA, monitor the voltage, current, and power dissipation. Make sure to stay within the recommended operating conditions, and consider using overvoltage protection (OVP) and overcurrent protection (OCP) circuits to prevent damage.
ROHM recommends using a low-ESR ceramic capacitor with a value between 1uF to 10uF, depending on the specific application requirements. A higher capacitance value can help improve transient response and reduce output voltage ripple.
The VS5V0BN1HST15R is rated for operation up to 125°C, but it's essential to consider the derating curves and thermal management to ensure reliable operation. ROHM provides a thermal derating chart in the datasheet to help with this calculation.
The output voltage tolerance is specified as ±2% in the datasheet. To calculate the output voltage accuracy, consider the initial accuracy, temperature coefficient, and line regulation. ROHM provides a formula in the datasheet to help with this calculation.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
VS5V0BN1HST15R Overview
Use the download button to access the VS5V0BN1HST15R schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like VS5V0,
or try a keyword search, such as Transient Suppressors
Suggested Parts
If you searched for VS5V0BN1HST15R, you might also be interested in these parts:
