Part Image

W25Q80BVDAIG - Winbond

Description: NOR Flash spiFlash, 8M-bit, 4Kb Uniform Sector

Download W25Q80BVDAIG Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
W25Q80BVDAIG - Winbond PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - 8 pin pdip
click to zoom
3D Models
W25Q80BVDAIG - Winbond  - 3D model - Dual-In-Line Packages - 8 pin pdip
click to zoom

W25Q80BVDAIG Details

  • Manufacturer Part Number:

    W25Q80BVDAIG

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    DIP

  • Package Description:

    0.300 INCH, GREEN, PLASTIC, DIP-8

  • Pin Count:

    8

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Manufacturer:

    Winbond Electronics Corp

  • YTEOL:

    0

  • Clock Frequency-Max (fCLK):

    80 MHz

  • Data Retention Time-Min:

    20

  • Endurance:

    100000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDIP-T8

  • Length:

    9.27 mm

  • Memory Density:

    8388608 bit

  • Memory IC Type:

    FLASH

  • Memory Width:

    8

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    1048576 words

  • Number of Words Code:

    1000000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    1MX8

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP8,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Parallel/Serial:

    SERIAL

  • Programming Voltage:

    3 V

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    5.33 mm

  • Serial Bus Type:

    SPI

  • Standby Current-Max:

    0.000005 A

  • Supply Current-Max:

    0.018 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    2.7 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    NO

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Type:

    NOR TYPE

  • Width:

    7.62 mm

  • Write Protection:

    HARDWARE/SOFTWARE

W25Q80BVDAIG Frequently Asked Questions (FAQs)

  • The W25Q80BVDAIG has a minimum of 100,000 erase cycles, but the actual number of cycles may vary depending on the usage and operating conditions.
  • The HOLD# signal is used to pause the current operation and allow the host to access the flash memory. To use the HOLD# signal, the host should assert the HOLD# signal low, and then de-assert it when the operation is complete.
  • The WP# pin is used to prevent accidental writes to the status register. When the WP# pin is low, the status register is write-protected, and when it is high, the status register can be written to.
  • To perform a sector erase, send the sector erase command (0x20) followed by the address of the sector to be erased. The device will then erase the entire sector.
  • The main difference between the W25Q80BVDAIG and the W25Q80BVFIG is the operating voltage range. The W25Q80BVDAIG operates from 2.7V to 3.6V, while the W25Q80BVFIG operates from 1.8V to 3.6V.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

W25Q80BVDAIG Overview

Use the download button to access the W25Q80BVDAIG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like W25Q8, or try a keyword search, such as Flash Memories

Parts related to W25Q80BVDAIG

Showing 0 results

W25Q80BVDAIG Alternates

Showing results

Image Part Number Model
Part Image W25Q80BVDAAP Winbond Electronics Corp

Flash, 1MX8, PDIP8