WHA250FET footprint, schematic symbol and 3D model by Ohmite

Symbol

PCB Footprints

3D Models

WHA250FET Details

The thermal resistance of the WHA250FET is typically around 1.5°C/W, but this can vary depending on the specific application and mounting method.
While the WHA250FET is primarily designed for low-frequency applications, it can be used in high-frequency applications up to 100 kHz with some degradation in performance. However, it's not recommended for high-frequency applications above 100 kHz.
To ensure proper heat sinking, make sure to use a thermal interface material (TIM) between the device and the heat sink, and secure the device to the heat sink using screws or a suitable mounting method. Also, ensure good airflow around the heat sink to dissipate heat efficiently.
The maximum allowable voltage for the WHA250FET is 250V, but it's recommended to derate the voltage to 200V or lower for reliable operation and to prevent overheating.
The WHA250FET is designed for high-current applications, but the maximum current rating depends on the specific application and cooling method. In general, the device can handle up to 250A, but it's recommended to derate the current to 200A or lower for reliable operation.

Community Provided

System Verified

Community Approved

Use the download button to access the WHA250FET schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like WHA25, or try a keyword search, such as Fixed Resistors

If you searched for WHA250FET, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →