The recommended layout and routing for the WM8523GEDT/R can be found in the Cirrus Logic application note AN215, which provides guidelines for PCB layout, component placement, and routing to ensure optimal performance and minimize noise.
The WM8523GEDT/R can be configured for different audio formats using the I2C interface. The device has several registers that control the audio format, sampling rate, and bit depth. Refer to the datasheet and the Cirrus Logic audio codec programming guide for more information.
The power consumption of the WM8523GEDT/R depends on the operating mode and the clock frequency. In typical operating conditions, the device consumes around 20-30 mA. Refer to the datasheet for more information on power consumption in different operating modes.
To troubleshoot issues with the WM8523GEDT/R, start by checking the power supply, clock, and reset signals. Verify that the device is properly configured and that the I2C interface is functioning correctly. Use a logic analyzer or oscilloscope to debug the digital signals and ensure that the audio data is being transmitted correctly.
Yes, the WM8523GEDT/R can be used with a different clock source. The device has an internal clock generator, but it can also be driven by an external clock source. However, ensure that the external clock source meets the device's clock requirements and that the clock frequency is within the specified range.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
WM8523GEDT/R Overview
Use the download button to access the WM8523GEDT/R schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like WM852,
or try a keyword search, such as Digital to Analog Converters
