WS2812B-V5 footprint, schematic symbol and 3D model by Worldsemi

Symbol

PCB Footprints

3D Models

WS2812B-V5 Details

The maximum number of LEDs that can be connected in a single string is 1024, but it's recommended to limit it to 512 for reliable operation.
The RES pin should be pulled high (VCC) through a 1kΩ resistor and connected to a 10nF capacitor to ground for proper reset operation.
The recommended clock frequency for data transmission is 800 kHz, but it can operate up to 1.25 MHz.
Use a twisted pair cable, keep the clock frequency as low as possible, and add a 33Ω resistor in series with the data line to reduce signal reflections.
Yes, the WS2812B-V5 can operate with a 5V power supply, but ensure the voltage regulator can handle the total current required by the LEDs.

Expert Contribution

System Verified

Community Approved

Use the download button to access the WS2812B-V5 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like WS281, or try a keyword search, such as Visible LEDs

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →