Part Image

X9317WM8IZT1 - Renesas Electronics

Description: The X9317 is a digitally controlled potentiometer (XDCP™). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The positio

Download X9317WM8IZT1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
X9317WM8IZT1 - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - M8.118
click to zoom
3D Models
X9317WM8IZT1 - Renesas Electronics  - 3D model - Small Outline Packages - M8.118
click to zoom

X9317WM8IZT1 Details

  • Manufacturer Part Number:

    X9317WM8IZT1

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    MSOP

  • Package Description:

    TSSOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    M8.118

  • Country Of Origin:

    Malaysia, Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    5

  • Additional Feature:

    NONVOLATILE MEMORY

  • Control Interface:

    INCREMENT/DECREMENT

  • Converter Type:

    DIGITAL POTENTIOMETER

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Positions:

    100

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Resistance Law:

    LINEAR

  • Resistance Tolerance-Max:

    20%

  • Resistor Terminal Voltage-Max:

    5.5 V

  • Seated Height-Max:

    1.1 mm

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Coefficient-Nom:

    300 ppm/°C

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Total Resistance-Nom:

    10000 Ω

  • Width:

    3 mm

X9317WM8IZT1 Frequently Asked Questions (FAQs)

  • Renesas provides a recommended PCB layout guide in their application note (AP-6094) for the X9317 series, which includes guidelines for thermal vias, copper pours, and component placement to ensure optimal thermal performance.
  • Renesas provides a fault detection and protection guide in their application note (AP-6095) for the X9317 series, which includes examples of fault detection circuits and protection methods for overvoltage, undervoltage, and overcurrent conditions.
  • The recommended power-up sequence is to first apply the VCC power supply, followed by the VREF power supply, and then the input voltage (VIN). This sequence ensures proper device operation and prevents latch-up or other issues.
  • The output voltage tolerance can be calculated using the formula: Output Voltage Tolerance = (Output Voltage Nominal x (Temperature Coefficient x (Temperature Range))) + (Output Voltage Nominal x (Line Regulation x (Input Voltage Range))). Refer to the datasheet for specific values and calculations.
  • The maximum capacitive load that the X9317WM8IZT1 can drive is 10uF. Exceeding this value may cause instability or oscillations in the output voltage. It's recommended to use a capacitor with a low ESR (Equivalent Series Resistance) to minimize the risk of oscillations.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

X9317WM8IZT1 Overview

Use the download button to access the X9317WM8IZT1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like X9317, or try a keyword search, such as Digital Potentiometers

Parts related to X9317WM8IZT1

Showing 0 results

X9317WM8IZT1 Alternates

Showing results

Image Part Number Model
Part Image X9317WM8-2.7 Xicor Inc

Digital Potentiometer, 1 Func, 10000ohm, Increment/decrement Control Interface, 100 Positions, CMOS, PDSO8

Part Image X9317WM8Z-2.7T1 Intersil Corporation

Digital Potentiometer, 1 Func, 10000ohm, Increment/decrement Control Interface, 100 Positions, CMOS, PDSO8

Part Image X9317WM8-2.7T1 Intersil Corporation

Digital Potentiometer, 1 Func, 10000ohm, Increment/decrement Control Interface, 100 Positions, CMOS, PDSO8

Part Image X9317WM8 Intersil Corporation

Digital Potentiometer, 1 Func, 10000ohm, Increment/decrement Control Interface, 100 Positions, CMOS, PDSO8

Part Image X9317WM8-T2 Intersil Corporation

IC 10K DIGITAL POTENTIOMETER, INCREMENT/DECREMENT CONTROL INTERFACE, 100 POSITIONS, PDSO8, MSOP-8, Digital Potentiometer

For a full list of alternate parts for X9317WM8IZT1, check out Findchips.com