The recommended PCB land pattern for the XAL1010-451MEB is a rectangular pad with a size of 4.5 mm x 3.5 mm, with a 1.5 mm diameter hole in the center for the inductor's lead.
The XAL1010-451MEB's inductance value can vary with temperature. To minimize the impact of temperature on the inductor's performance, it's recommended to use a temperature-stable core material and to follow proper PCB design and layout practices.
The maximum current rating for the XAL1010-451MEB is 4.5 A, but this value can be affected by the operating frequency, temperature, and other factors. It's recommended to derate the current rating based on the specific application requirements.
Yes, the XAL1010-451MEB is suitable for high-frequency applications up to 1 GHz. However, the inductor's performance may degrade at higher frequencies due to skin effect and other parasitic effects.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 270°C, and apply a small amount of solder paste to the PCB pads. Avoid applying excessive heat or solder, as this can damage the inductor or the PCB.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
XAL1010-451MEB Overview
Use the download button to access the XAL1010-451MEB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XAL10,
or try a keyword search, such as Fixed Inductors
About COILCRAFT
Colicraft designs and manufactures high performing magnectic components, RF chip inductors, power magnectics, and filters. Coilcraft has engineering, manufacturing, and distribution facilities in North America, Asia, and Europe.
