XAL6060-472MEC - COILCRAFT

XAL6060-472MEC Frequently Asked Questions (FAQs)

• What is the recommended PCB land pattern for the XAL6060-472MEC?
  The recommended PCB land pattern for the XAL6060-472MEC is a rectangular pad with a size of 60 mils x 40 mils (1.52 mm x 1.02 mm) with a 10 mil (0.25 mm) spacing between pads.
• How do I handle the XAL6060-472MEC's sensitivity to temperature?
  The XAL6060-472MEC's inductance and Q values are sensitive to temperature. To minimize the impact of temperature, ensure good airflow around the inductor, avoid high temperatures (>125°C), and consider using a thermally conductive pad or heat sink if necessary.
• What is the maximum current rating for the XAL6060-472MEC?
  The maximum current rating for the XAL6060-472MEC is 4.7 A, but this can be affected by the operating frequency, temperature, and other factors. Always check the inductor's temperature rise and saturation current to ensure reliable operation.
• Can I use the XAL6060-472MEC in a high-frequency application?
  Yes, the XAL6060-472MEC is suitable for high-frequency applications up to 1 GHz. However, be aware that the inductor's self-resonant frequency (SRF) is around 300 MHz, and the inductance and Q values may vary at higher frequencies.
• How do I ensure the XAL6060-472MEC is properly soldered to the PCB?
  To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the PCB pads. Avoid applying excessive heat or pressure, which can damage the inductor or PCB.