XAL6060-682MEB - COILCRAFT

XAL6060-682MEB Frequently Asked Questions (FAQs)

• What is the recommended PCB land pattern for the XAL6060-682MEB?
  The recommended PCB land pattern for the XAL6060-682MEB is a rectangular pad with a size of 6.5 mm x 4.5 mm, with a 1.5 mm diameter hole in the center for the inductor's lead.
• How do I handle the XAL6060-682MEB's high current rating in my design?
  To handle the high current rating of the XAL6060-682MEB, ensure that your PCB traces and vias are designed to handle the maximum current rating of the inductor. Use a sufficient trace width and via size to minimize resistance and heat generation.
• What is the operating temperature range of the XAL6060-682MEB?
  The operating temperature range of the XAL6060-682MEB is -40°C to +125°C. However, the inductor's characteristics may vary outside the recommended operating temperature range of -20°C to +100°C.
• How do I ensure the XAL6060-682MEB is properly soldered to the PCB?
  To ensure proper soldering of the XAL6060-682MEB, use a soldering iron with a temperature of 250°C to 270°C, and apply a small amount of solder paste to the PCB pads. Use a soldering technique that minimizes the risk of overheating the component.
• What is the moisture sensitivity level (MSL) of the XAL6060-682MEB?
  The XAL6060-682MEB has a moisture sensitivity level (MSL) of 1, which means it can be exposed to a relative humidity of 85% at 85°C for 168 hours without being damaged.