Torex provides a recommended PCB layout in their application note AN042, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize noise.
The output capacitor selection depends on the output voltage, output current, and desired ripple voltage. Torex recommends using a low-ESR ceramic capacitor with a value between 1uF to 10uF, and a voltage rating of at least 2x the output voltage. A higher capacitance value can help reduce output voltage ripple and improve transient response.
Although the datasheet specifies a maximum input voltage of 6.5V, Torex recommends limiting the input voltage to 5.5V to ensure reliable operation and prevent damage to the internal circuitry.
To ensure stability, follow the recommended PCB layout, use a suitable output capacitor, and avoid long traces and loops in the power supply lines. Additionally, adding a 10nF to 100nF ceramic capacitor between the VIN and GND pins can help improve stability and reduce noise.
The thermal derating for the XC6218P332HR-G is typically 1.5mA/°C above 25°C. This means that for every 1°C increase in ambient temperature above 25°C, the maximum output current should be reduced by 1.5mA to prevent overheating and ensure reliable operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
XC6218P332HR-G Overview
Use the download button to access the XC6218P332HR-G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XC621,
or try a keyword search, such as Linear Regulator ICs
Suggested Parts
If you searched for XC6218P332HR-G, you might also be interested in these parts:
