A good PCB layout for XC6901D331MR-G should consider thermal management, noise reduction, and signal integrity. Place the device near the power source, use a solid ground plane, and keep sensitive analog signals away from digital signals. Refer to Torex's application notes and layout guidelines for more information.
Verify that the input voltage, output current, and ambient temperature are within the specified ranges. Ensure proper thermal management, and avoid exceeding the maximum junction temperature (Tj) of 125°C. Monitor the device's thermal shutdown and overcurrent protection features to prevent damage.
A low-ESR ceramic capacitor (e.g., X5R or X7R) with a value between 1-10uF is recommended for input decoupling. The capacitor should be placed as close to the VIN pin as possible to minimize noise and ensure stable operation.
The output voltage accuracy is typically specified as a percentage of the nominal output voltage. Calculate the output voltage accuracy by considering the tolerance of the internal voltage reference, the resistor divider network, and any external components. Refer to the datasheet and application notes for more information.
The maximum output current capability of XC6901D331MR-G is 300mA during startup and 150mA during normal operation. Ensure that the output current does not exceed these limits to prevent damage to the device.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
XC6901D331MR-G Overview
Use the download button to access the XC6901D331MR-G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XC690,
or try a keyword search, such as Linear Regulator ICs
