The recommended land pattern for the XFL4030-472MEC is a rectangular pad with a size of 3.8 mm x 2.5 mm, with a non-solder mask defined (NSMD) pad shape.
To minimize the impact of PCB layout and proximity to other components, keep the XFL4030-472MEC at least 1.5 mm away from other components, and use a solid ground plane underneath the inductor to reduce electromagnetic interference (EMI).
The maximum operating temperature range for the XFL4030-472MEC is -40°C to +125°C, with a derating of inductance and Q factor above 85°C.
To ensure proper soldering, use a soldering iron with a temperature of 260°C to 280°C, and apply a small amount of solder paste to the pads. Avoid applying excessive heat or pressure, which can damage the inductor.
The ESR of the XFL4030-472MEC is approximately 0.25 ohms at 100 kHz, and 0.35 ohms at 1 MHz.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
XFL4030-472MEC Overview
Use the download button to access the XFL4030-472MEC schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XFL40,
or try a keyword search, such as Fixed Inductors
About COILCRAFT
Colicraft designs and manufactures high performing magnectic components, RF chip inductors, power magnectics, and filters. Coilcraft has engineering, manufacturing, and distribution facilities in North America, Asia, and Europe.
