The recommended land pattern for the XPL2010-472MLB is a rectangular pad with a size of 2.5 mm x 1.5 mm, with a non-solder mask defined (NSMD) pad shape.
The XPL2010-472MLB's inductance value can vary with temperature. To minimize the impact of temperature, ensure the inductor is operated within the recommended temperature range of -40°C to +125°C, and consider using a temperature compensation circuit if necessary.
The maximum current rating for the XPL2010-472MLB is 4.7 A, but this value can be affected by the operating frequency, temperature, and other factors. Always check the inductor's current rating at the specific operating conditions of your design.
To ensure proper soldering, use a soldering iron with a temperature of 260°C to 280°C, and apply a small amount of solder paste to the pads. Avoid applying excessive heat or pressure, which can damage the inductor.
Yes, the XPL2010-472MLB is suitable for high-frequency applications up to 1 GHz. However, be aware that the inductor's impedance and inductance values may vary at high frequencies, and consider using simulation tools or consulting with a Coilcraft engineer to ensure optimal performance.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
XPL2010-472MLB Overview
Use the download button to access the XPL2010-472MLB schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like XPL20,
or try a keyword search, such as Fixed Inductors
About COILCRAFT
Colicraft designs and manufactures high performing magnectic components, RF chip inductors, power magnectics, and filters. Coilcraft has engineering, manufacturing, and distribution facilities in North America, Asia, and Europe.
