Part Image

XR22404CG28TR-F - EXAR

Description: USB Interface IC USB 2.0 4-Port Hub

Download XR22404CG28TR-F Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
XR22404CG28TR-F - EXAR PCB footprint - Small Outline Packages - Small Outline Packages - SSOP-28 XR22404
click to zoom
3D Models
XR22404CG28TR-F - EXAR  - 3D model - Small Outline Packages - SSOP-28 XR22404
click to zoom

XR22404CG28TR-F Details

  • Manufacturer Part Number:

    XR22404CG28TR-F

  • Pbfree Code:

    Yes

  • Part Life Cycle Code:

    Transferred

  • HTS Code:

    8542.31.00.30

  • Manufacturer:

    Exar Corporation

  • uPs/uCs/Peripheral ICs Type:

    BUS CONTROLLER, UNIVERSAL SERIAL BUS

XR22404CG28TR-F Frequently Asked Questions (FAQs)

  • A good PCB layout for the XR22404CG28TR-F should ensure that the analog and digital grounds are separated, and the analog ground is connected to the digital ground at a single point. Additionally, the layout should minimize noise coupling between the analog and digital sections, and ensure that the power supply decoupling capacitors are placed close to the device.
  • To ensure proper power-up and configuration, it is recommended to follow a controlled power-up sequence, where the power supply voltage (VCC) is applied before the clock signal. Additionally, the device should be configured in a known state during startup, such as by pulling the reset pin (RST) low during power-up.
  • The XR22404CG28TR-F has a maximum junction temperature (TJ) of 150°C. To ensure reliable operation, it is recommended to keep the device temperature below 125°C. This can be achieved by using a heat sink, ensuring good airflow, and minimizing power dissipation in the device.
  • To troubleshoot issues with the XR22404CG28TR-F, it is recommended to follow a systematic approach, starting with a review of the device's configuration and setup. Check the power supply voltage, clock signal, and reset pin configuration. Use oscilloscopes or logic analyzers to monitor the device's signals and identify any anomalies. Consult the datasheet and application notes for guidance on troubleshooting specific issues.
  • Yes, the XR22404CG28TR-F is a high-speed device and can be susceptible to electromagnetic interference (EMI). To minimize EMI, it is recommended to use a shielded enclosure, keep the device away from sources of electromagnetic radiation, and use EMI filters or chokes on the power supply lines.

Trust Checks

This model has been verified by system checks.
System Verified
Sponsored

XR22404CG28TR-F Overview

Use the download button to access the XR22404CG28TR-F schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XR224, or try a keyword search, such as Bus Controllers

Parts related to XR22404CG28TR-F

Showing 0 results