Omron recommends a 4-layer PCB with a solid ground plane and a separate power plane for the sensor. The sensor should be placed at least 1.5 mm away from any other components, and the PCB should have a minimum of 1 oz copper thickness.
Calibration of XS2M-D423 involves adjusting the zero-point and span of the sensor. Omron provides a calibration procedure in the application note, which involves applying a known magnetic field and adjusting the sensor output to match the expected value.
The XS2M-D423 can operate in a temperature range of -40°C to 125°C, but the accuracy and sensitivity of the sensor may degrade at extreme temperatures. Omron recommends operating the sensor within the range of -20°C to 85°C for optimal performance.
Yes, the XS2M-D423 is designed to withstand vibrations up to 10 G (rms) in the frequency range of 10 Hz to 2 kHz. However, Omron recommends taking additional measures to secure the sensor and PCB to prevent damage or misalignment.
The XS2M-D423 has an analog output that can be interfaced with a microcontroller's analog-to-digital converter (ADC). Omron recommends using a 12-bit or 16-bit ADC to ensure accurate measurements. The sensor output can be connected to the microcontroller through a voltage divider or an op-amp circuit.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
XS2M-D423 Overview
Use the download button to access the XS2M-D423 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like XS2M-,
or try a keyword search, such as Other Circular Connectors
