The recommended soldering temperature is 260°C (500°F) with a maximum soldering time of 10 seconds. It's essential to follow these guidelines to prevent damage to the thermistor.
Yes, the ZMY18-GS18 is suitable for use in high-humidity environments. However, it's essential to ensure proper sealing and protection to prevent moisture ingress, which can affect the thermistor's accuracy and reliability.
The self-heating effect of the ZMY18-GS18 is approximately 1-2 mW/°C. This means that the thermistor can heat up by 1-2°C when a current is applied. To minimize the self-heating effect, it's recommended to use a low excitation current (e.g., 10-20 μA) and ensure good thermal coupling to the measured object.
The ZMY18-GS18 has a non-linear response to temperature changes, which can be compensated for using look-up tables, polynomial equations, or thermistor linearization circuits. It's essential to consult the datasheet and application notes for guidance on how to handle the non-linear response.
The recommended wire size is 30 AWG (0.05 mm²) or larger, and the material should be a low-thermal-conductivity wire (e.g., copper or aluminum) with a high-temperature insulation (e.g., Teflon or Kapton). This ensures minimal thermal conduction and electrical noise.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ZMY18-GS18 Overview
Use the download button to access the ZMY18-GS18 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like ZMY18,
or try a keyword search, such as Voltage Regulator Diodes
