Mini-Circuits recommends a 4-layer PCB with a solid ground plane, and a via-stitched ground plane around the amplifier. The input and output should be matched to 50 ohms, and the device should be placed close to the ground plane.
The ZX60-53LNB-S+ requires a single positive supply voltage between 8V to 15V, and a bias current of around 100mA. The recommended biasing scheme is to use a voltage regulator and a resistor network to set the bias voltage and current.
The maximum input power that the ZX60-53LNB-S+ can handle is +10dBm. Exceeding this power may cause compression, distortion, or even damage to the device.
For high-power applications, it is recommended to use a heat sink with a thermal conductivity of at least 1W/m-K, and to ensure good thermal contact between the device and the heat sink. The device should also be placed in a well-ventilated area to prevent overheating.
The typical noise figure of the ZX60-53LNB-S+ is around 2.5dB, but this can vary depending on the frequency, temperature, and operating conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ZX60-53LNB-S+ Overview
Use the download button to access the ZX60-53LNB-S+ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ZX60-,
or try a keyword search, such as RF/Microwave Amplifiers
About Mini-Circuits
Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.
