The recommended mounting pad layout for the 1N1614 is a rectangular pad with a minimum size of 0.05 inches x 0.05 inches (1.27 mm x 1.27 mm) and a maximum size of 0.1 inches x 0.1 inches (2.54 mm x 2.54 mm). The pad should be centered on the device and have a non-solder-mask-defined (NSMD) shape.
The 1N1614 is a sensitive device and requires proper ESD protection during handling and assembly. It is recommended to use an ESD wrist strap or mat, and to handle the device by the body or leads, rather than the glass diode itself. Additionally, the device should be stored in an anti-static bag or container when not in use.
The maximum allowable voltage for the 1N1614 is 1000 V, as specified in the datasheet. However, it is recommended to derate the voltage to 800 V or less for reliable operation and to prevent damage to the device.
The 1N1614 is rated for operation up to 150°C, but it is recommended to derate the voltage and current ratings at high temperatures to prevent thermal runaway and ensure reliable operation. It is also important to ensure good thermal management and heat sinking to prevent overheating.
The 1N1614 has a polarity mark on the body of the device, which indicates the cathode (negative) lead. The polarity mark is typically a band or a dot on the device. The cathode lead should be connected to the negative voltage or ground, and the anode (positive) lead should be connected to the positive voltage or signal.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
1N1614 Overview
Use the download button to access the 1N1614 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like 1N161,
or try a keyword search, such as Rectifier Diodes
