The recommended mounting pad layout for the 1N459 is a rectangular pad with a minimum size of 0.5 mm x 1.5 mm, with a 0.5 mm clearance around the pad to ensure proper heat dissipation and to prevent electrical shorts.
To prevent electrostatic discharge (ESD) damage to the 1N459, it is recommended to use an ESD wrist strap or mat, and to handle the device by the body or pins, rather than the leads. Additionally, the device should be stored in an anti-static bag or tube when not in use.
The maximum allowable voltage for the 1N459 is 1000 V, as specified in the datasheet. Exceeding this voltage may result in device damage or failure.
The 1N459 is a standard rectifier diode, and its polarity is determined by the cathode (negative) and anode (positive) terminals. The cathode is marked with a band or notch, and the anode is the other terminal. Correct polarity is essential to ensure proper device operation and to prevent damage.
The thermal resistance of the 1N459 is typically around 10°C/W, which means that for every watt of power dissipated, the junction temperature will increase by 10°C. This value can vary depending on the specific application and mounting conditions.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
1N459 Overview
Use the download button to access the 1N459 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Rectifier Diodes