The recommended PCB layout for the 1SMC36AT3 is to use a ground plane underneath the device, and to keep the leads as short as possible to minimize inductance. A minimum of 2 oz copper thickness is recommended for the PCB.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder to the leads. Avoid applying excessive heat or pressure, which can damage the device.
The maximum surge current rating for the 1SMC36AT3 is 3000 A, with a pulse width of 10/1000 μs.
The 1SMC36AT3 is rated for operation up to 150°C, but derating is required above 125°C. Consult the datasheet for specific derating information.
Handle the 1SMC36AT3 with ESD-protective equipment, such as wrist straps or mats, to prevent damage from electrostatic discharge.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
1SMC36AT3 Overview
Use the download button to access the 1SMC36AT3 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like 1SMC3,
or try a keyword search, such as Transient Suppressors