Description:The 5L35023 is a VersaClock programmable clock generator and is designed for low power, consumer, and high performance PCI Express applications. The 5L35023 device is a three PLL architecture design, and each PLL is individually programmable and allowing for up to five unique frequency outputs.The 5L35023 has built-in unique features such as Proactive Power Saving (PPS), Performance-Power Balancing (PPB), Overshot Reduction Technology (ORT) and Extreme Low Power DCO. An internal OTP memory allows the user t
Renesas provides a recommended PCB layout guide in their application note (APL-AN-114) for the 5L35023-000NLGI. It suggests using a 4-layer PCB with a solid ground plane, placing the device near the center of the board, and using thermal vias to dissipate heat.
To ensure reliable operation in high-temperature environments, it's essential to follow Renesas' recommended thermal design guidelines, including using a heat sink, thermal interface material, and ensuring good airflow. Additionally, consider using a thermistor or temperature sensor to monitor the device's temperature and implement thermal throttling or shutdown if necessary.
While the 5L35023-000NLGI can operate with input voltages between 2.7V and 3.6V, using a different input voltage than the recommended 3.3V may affect the device's performance, power consumption, and output voltage accuracy. Consult Renesas' application notes and datasheet for specific guidance on input voltage variations.
To troubleshoot issues with the device's output voltage regulation, check the input voltage, output load, and PCB layout for any anomalies. Verify that the device is properly configured, and the output voltage is within the specified range. Use an oscilloscope to monitor the output voltage and check for any signs of oscillation or instability. Consult Renesas' application notes and technical support resources for further guidance.
Yes, the 5L35023-000NLGI is a high-frequency device, and proper EMI/EMC design considerations are essential. Follow Renesas' guidelines for PCB layout, component placement, and shielding to minimize EMI emissions. Additionally, use EMI filters, ferrite beads, or common-mode chokes to reduce emissions and improve immunity.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
5L35023-000NLGI Overview
Use the download button to access the 5L35023-000NLGI schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 5L350,
or try a keyword search, such as Clock Generators
