Description:The 8P34S1102 is a high-performance differential LVDS fanout buffer. The device is designed for the fanout of 1PPS signals or high-frequency, very low additive phase-noise clock and data signals. The 8P34S1102 supports fail-safe operation and is characterized to operate from a 1.8V or 2.5V power supply. Guaranteed output-to-output and part-to-part skew characteristics make the 8P34S1102 ideal for those clock distribution applications demanding well-defined performance and repeatability. One differential inp
A good PCB layout for the 8P34S1102NLGI8 involves keeping the clock input traces as short as possible, using a solid ground plane, and minimizing the distance between the device and the crystal oscillator. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure proper power and decoupling, use a high-quality power supply with low noise and ripple. Add decoupling capacitors (e.g., 0.1uF and 10uF) close to the device's power pins, and consider adding a 10uF capacitor between the VDD and VSS pins. Also, ensure the power supply can provide the required current for the device.
The 8P34S1102NLGI8 has a maximum junction temperature of 150°C. Ensure good airflow around the device, and consider using a heat sink or thermal pad if the device will be operating in a high-temperature environment. Also, avoid overheating the device during soldering or rework.
To configure the 8P34S1102NLGI8 for use with a specific crystal oscillator, refer to the crystal's datasheet for the recommended load capacitance and series resistance values. Then, use the 8P34S1102NLGI8's internal capacitors or add external capacitors to match the recommended values. Also, ensure the crystal oscillator is compatible with the device's frequency range.
To minimize EMI and RFI, use a shielded enclosure, and ensure the PCB layout is designed to reduce radiation. Use a common-mode choke or ferrite bead on the power supply lines, and consider adding EMI filters or shielding to the device's clock input traces.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
8P34S1102NLGI8 Overview
Use the download button to access the 8P34S1102NLGI8 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 8P34S,
or try a keyword search, such as Clock Drivers
Suggested Parts
If you searched for 8P34S1102NLGI8, you might also be interested in these parts:
