Please enter a minimum 3 letters or numbers
Technical Content
Part Image

A1302KUA-T - Allegro Microsystems

Description: A1302KUA-T Allegro Microsystems,, Linear Hall Effect Sensor, 4.5 → 6 V, 3-Pin Ultra Mini SIP

Download A1302KUA-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
A1302KUA-T - Allegro Microsystems - PCB symbol
click to zoom
PCB Footprints
A1302KUA-T - Allegro Microsystems PCB footprint - Other - Other - Package UA, 3-Pin SIP_FFW
click to zoom
3D Models
A1302KUA-T - Allegro Microsystems - 3D model - Other - Package UA, 3-Pin SIP_FFW
click to zoom

A1302KUA-T Details

  • Manufacturer Part Number:

    A1302KUA-T

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Package Description:

    SIP-3

  • Manufacturer:

    Allegro MicroSystems LLC

  • YTEOL:

    0

  • Additional Feature:

    MAGNETIC SENSITIVITY

  • Body Breadth:

    1.52 mm

  • Body Height:

    3.035 mm

  • Body Length or Diameter:

    4.105 mm

  • Input Mode:

    UNIPOLAR

  • JESD-609 Code:

    e3

  • Linearity (%):

    2.5 %

  • Mounting Feature:

    THROUGH HOLE MOUNT

  • Number of Terminals:

    3

  • Operating Current-Max:

    11 mA

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Polarity:

    NON-INVERTING

  • Output Range:

    2.40-2.60V

  • Output Type:

    DIGITAL VOLTAGE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Equivalence Code:

    SIP3,.02,50

  • Package Shape/Style:

    RECTANGULAR

  • Resistance:

    2 Ω

  • Sensitivity (mV/G):

    1.3 mV/G

  • Sensors/Transducers Type:

    PROXIMITY SENSOR,HALL EFFECT

  • Supply Voltage-Max:

    6 V

  • Supply Voltage-Min:

    4.5 V

  • Surface Mount:

    NO

  • Technology:

    CMOS

  • Terminal Finish:

    Matte Tin (Sn)

  • Termination Type:

    SOLDER

A1302KUA-T Frequently Asked Questions (FAQs)

  • A symmetrical layout with the IC at the center, and a solid ground plane on the bottom layer is recommended. Keep the sense lines as short as possible and away from noise sources.
  • Use twisted pair wiring for the output signals, and consider adding a low-pass filter or a shielded cable to reduce electromagnetic interference (EMI).
  • The maximum allowable voltage on the VCC pin is 6.5V. Exceeding this voltage may damage the device.
  • The A1302KUA-T is rated for operation up to 150°C. However, the device's accuracy and reliability may degrade at high temperatures. Consider using a heat sink or a thermal interface material to reduce the junction temperature.
  • Calibration is not required for the A1302KUA-T, as it is a ratiometric device. However, you may need to adjust the gain and offset of the output signals based on your specific application requirements.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

A1302KUA-T Overview

Use the download button to access the A1302KUA-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A1302, or try a keyword search, such as Proximity Sensors

Parts related to A1302KUA-T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑