Panasonic recommends a 4-layer PCB with a solid ground plane and a separate power plane for the ABJ361861. The device should be placed near the center of the board, and the input and output pins should be routed away from each other to minimize noise and coupling.
The ABJ361861 has a maximum junction temperature of 150°C. To ensure reliable operation, Panasonic recommends using a heat sink with a thermal resistance of 10°C/W or less, and ensuring good airflow around the device. Additionally, the device should be mounted on a PCB with a thermal vias to dissipate heat effectively.
Panasonic recommends using input and output capacitors with a value of 10uF or greater, and a voltage rating of 25V or higher. The capacitors should be placed as close to the device as possible to minimize noise and ensure stable operation.
To ensure EMC, Panasonic recommends using a shielded enclosure, and ensuring that the PCB is designed with good electromagnetic shielding in mind. Additionally, the device should be placed away from other noise-sensitive components, and the input and output lines should be routed away from each other to minimize noise and coupling.
Panasonic recommends a soldering profile with a peak temperature of 260°C, and a dwell time of 10-30 seconds. The device should be soldered using a solder with a melting point of 217°C or higher, and the PCB should be preheated to 150°C or higher before soldering.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ABJ361861 Overview
Use the download button to access the ABJ361861 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ABJ36,
or try a keyword search, such as Snap Acting/Limit Switches
