The recommended operating voltage range for ABS10 is 2.7V to 5.5V, although it can tolerate up to 6.5V for short periods.
To ensure proper power-on and power-off, it's recommended to use a power-on reset (POR) circuit and a voltage supervisor to monitor the power supply voltage.
The ABS10 can sink up to 20mA and source up to 10mA, although it's recommended to limit the current to 5mA for reliable operation.
To enter power-down mode, set the EN pin low and ensure all inputs are at a valid logic level. The device will consume less than 1uA in power-down mode.
To minimize noise and ensure reliable operation, it's recommended to use a ground plane, keep signal traces short and away from power traces, and use decoupling capacitors near the device.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ABS10 Overview
Use the download button to access the ABS10 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Bridge Rectifier Diodes
