OVER CURRENT, OVER VOLTAGE, OVER TEMPERATURE, SHORT CIRCUIT
Ripple Voltage (Main Out):
0.03535 Vrms
Seated Height-Max:
11.25 mm
Surface Mount:
NO
Technology:
HYBRID
Terminal Form:
PIN/PEG
Terminal Position:
DUAL
Total Power Output-Max:
50 W
Trim/Adjustable Output:
YES
Warm-up Time:
0.03 s
Width:
25.4 mm
AEE10F18-L Frequently Asked Questions (FAQs)
The recommended PCB layout involves placing the device on a multi-layer board with a solid ground plane, using thermal vias to dissipate heat, and keeping the input and output traces separate. A thermal pad on the bottom of the device should be connected to a heat sink or a thermal interface material to ensure efficient heat dissipation.
To ensure proper biasing, the device requires a stable input voltage, and the output voltage should be set to the desired level using an external resistor divider network. The recommended biasing scheme is provided in the application note or the manufacturer's documentation.
To prevent damage, handle the device by the body or the pins, avoiding touching the sensitive electrical components. Use an anti-static wrist strap or mat, and store the device in an anti-static bag or container. Avoid exposing the device to extreme temperatures, humidity, or physical stress.
To troubleshoot common issues, check the input voltage, output load, and PCB layout for any anomalies. Verify that the device is properly biased and the thermal management is adequate. Use an oscilloscope to monitor the output voltage and current, and consult the application note or manufacturer's documentation for guidance on troubleshooting specific issues.
Yes, the AEE10F18-L is a high-frequency device and requires proper EMI/EMC design considerations. Use a shielded enclosure, keep the input and output traces separate, and use EMI filters or common-mode chokes to minimize electromagnetic interference. Follow the manufacturer's guidelines and industry standards for EMI/EMC compliance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AEE10F18-L Overview
Use the download button to access the AEE10F18-L schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AEE10,
or try a keyword search, such as Power Supply Modules
