REVERSE POLARITY PROTECTION; SHORT CIRCUIT PROTECTION
Body Breadth:
3.9 mm
Body Height:
1.25 mm
Body Length or Diameter:
4.9 mm
Housing:
PLASTIC
JESD-609 Code:
e3
Measurement Range-Max (deg):
360 deg
Mounting Feature:
SURFACE MOUNT
Operating Current-Max:
12 mA
Operating Temperature-Max:
150 °C
Operating Temperature-Min:
-40 °C
Output Type:
ANALOG VOLTAGE
Package Shape/Style:
RECTANGULAR
Sensors/Transducers Type:
ROTARY POSITION SENSOR,HALL EFFECT
Supply Voltage-Max:
5.5 V
Supply Voltage-Min:
4.5 V
Surface Mount:
YES
Terminal Finish:
TIN
Termination Type:
SOLDER
AS5162-HSOM Frequently Asked Questions (FAQs)
The recommended PCB layout for optimal performance of the AS5162-HSOM involves keeping the Hall sensor and magnet in close proximity, using a symmetrical layout, and minimizing copper pours and vias near the sensor to reduce noise and interference.
Calibration of the AS5162-HSOM involves setting the zero-point and sensitivity of the sensor using the provided calibration registers. The exact calibration procedure may vary depending on the application, but typically involves rotating the magnet and taking measurements at different positions to determine the optimal settings.
The AS5162-HSOM is rated for operation from -40°C to 150°C, but the maximum operating temperature range may vary depending on the specific application and environmental conditions. It's recommended to consult the datasheet and application notes for more information.
While the AS5162-HSOM is optimized for use with the recommended magnet size and shape, it can be used with different magnets. However, the performance and accuracy of the sensor may be affected, and additional calibration may be required. It's recommended to consult the application notes and perform testing to ensure the desired performance is achieved.
To handle noise and interference when using the AS5162-HSOM, it's recommended to use proper PCB layout and design techniques, such as shielding, grounding, and filtering. Additionally, the sensor provides built-in noise filtering and error detection mechanisms that can be enabled through the provided registers.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AS5162-HSOM Overview
Use the download button to access the AS5162-HSOM schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AS516,
or try a keyword search, such as Rotary Position Sensors
