Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ASSR-1611-501E - Avago Technologies

Description: High Current, 1 Form A, Solid State Relay (MOSFET)

Download ASSR-1611-501E Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ASSR-1611-501E - Avago Technologies - PCB symbol
click to zoom
PCB Footprints
ASSR-1611-501E - Avago Technologies PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - ASSR-1611 6-Pin DIP Package
click to zoom
3D Models
ASSR-1611-501E - Avago Technologies - 3D model - Dual-In-Line Packages - ASSR-1611 6-Pin DIP Package
click to zoom

ASSR-1611-501E Details

  • Manufacturer Part Number:

    ASSR-1611-501E

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    0.300 INCH, ROHS COMPLIANT, SURFACE MOUNT, DIP-6

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Thailand

  • HTS Code:

    8541.40.95.00

  • Manufacturer:

    Avago Technologies

  • YTEOL:

    5.94

  • Additional Feature:

    CMOS COMPATIBLE, UL RECOGNIZED

  • Configuration:

    COMPLEX

  • Forward Current-Max:

    0.02 A

  • Input Type:

    DC

  • Isolation Voltage-Max:

    3750 V

  • JESD-609 Code:

    e3

  • Number of Elements:

    1

  • On-State Current-Max:

    2.5 A

  • On-state Resistance-Max:

    0.1 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Optoelectronic Device Type:

    TRANSISTOR OUTPUT SSR

  • Output Circuit Type:

    MOSFET

  • Overall Height:

    4.19 mm

  • Overall Length:

    9.65 mm

ASSR-1611-501E Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal traces short and away from noise sources. Use a common mode filter or a ferrite bead to reduce EMI.
  • Use a heat sink or a thermal pad to dissipate heat. Ensure good airflow around the device. Consider using a thermal interface material to improve heat transfer. Operate the device within the recommended temperature range (–40°C to 125°C).
  • Power up the device in the following sequence: VCC, then AVCC, then DVCC. Ensure that the power supplies are stable and within the recommended voltage range before applying the clock signal.
  • Use a logic analyzer or an oscilloscope to monitor the device's signals. Check the power supply voltages and ensure they are within the recommended range. Verify that the clock signal is stable and within the recommended frequency range.
  • Use a programming adapter or a development board specifically designed for the ASSR-1611-501E. Follow the programming guide provided by Broadcom Limited or a third-party programming tool vendor.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ASSR-1611-501E Overview

Use the download button to access the ASSR-1611-501E schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ASSR-, or try a keyword search, such as Solid State Relays

Parts related to ASSR-1611-501E

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑