Part Image

AT25FF041A-MAHN-T - Renesas Electronics

Description: The AT25FF041A is a member of our Standard class code and data storage solutions and is ideally suited for systems that need fast Read performance and low Sleep power for boot/code shadowing and Execute-in-Place tasks. It’s low power consumption and wide operating voltage range are optimized for battery-powered designs.

Download AT25FF041A-MAHN-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AT25FF041A-MAHN-T - Renesas Electronics PCB footprint - Small Outline No-lead - Small Outline No-lead - 8MA3 – UDFN.
click to zoom
3D Models
AT25FF041A-MAHN-T - Renesas Electronics  - 3D model - Small Outline No-lead - 8MA3 – UDFN.
click to zoom

AT25FF041A-MAHN-T Details

  • Manufacturer Part Number:

    AT25FF041A-MAHN-T

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    DFN

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    3

  • Clock Frequency-Max (fCLK):

    133 MHz

  • Data Retention Time-Min:

    20

  • Endurance:

    100000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-N8

  • Length:

    3 mm

  • Memory Density:

    4194304 bit

  • Memory IC Type:

    FLASH

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    524288 words

  • Number of Words Code:

    512000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    512KX8

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC8,.12,20

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Parallel/Serial:

    SERIAL

  • Programming Voltage:

    1.8 V

  • Seated Height-Max:

    0.6 mm

  • Serial Bus Type:

    QSPI

  • Standby Current-Max:

    0.000019 A

  • Supply Current-Max:

    0.0175 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    1.65 V

  • Supply Voltage-Nom (Vsup):

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Type:

    NOR TYPE

  • Width:

    2 mm

  • Write Protection:

    HARDWARE/SOFTWARE

AT25FF041A-MAHN-T Frequently Asked Questions (FAQs)

  • The AT25FF041A-MAHN-T has a minimum of 100,000 erase cycles, but the actual number of cycles may vary depending on the usage and operating conditions.
  • The hold pin (HOLD#) should be pulled high during power-up and power-down to prevent any unwanted writes or erases. It's recommended to connect a pull-up resistor to VCC and a capacitor to ground to ensure a clean power-up and power-down sequence.
  • The recommended clock frequency for the SPI interface is up to 50 MHz, but it can operate at lower frequencies as well. However, it's essential to ensure that the clock frequency is within the specified range to maintain reliable data transfer.
  • The WP# pin should be pulled high during normal operation to enable write and erase operations. If the WP# pin is pulled low, the device will be in a protected state, and any write or erase operations will be inhibited.
  • The RDY# pin is an output pin that indicates the device's busy status. When the device is busy with an internal operation, the RDY# pin will be low. Once the operation is complete, the RDY# pin will go high, indicating that the device is ready for the next operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AT25FF041A-MAHN-T Overview

Use the download button to access the AT25FF041A-MAHN-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AT25F, or try a keyword search, such as Flash Memories

Parts related to AT25FF041A-MAHN-T

Showing 0 results