Description:The AT25PE80 DataFlash-L has the same features and performance as our DataFlash® family with a standard pin assignment that enables easy replacement of Micron M25PE products that are no longer available and unable to support those designs that have gone to mass production.
IT ALSO OPERATES AT FREQUENCY 85 MHZ AT 1.7 TO 3.6 V SUPPLY VOLTAGE
Clock Frequency-Max (fCLK):
133 MHz
Data Retention Time-Min:
20
Endurance:
100000 Write/Erase Cycles
JESD-30 Code:
R-PDSO-G8
Length:
4.925 mm
Memory Density:
8388608 bit
Memory IC Type:
FLASH
Memory Width:
8
Moisture Sensitivity Level:
1
Number of Functions:
1
Number of Terminals:
8
Number of Words:
1048576 words
Number of Words Code:
1000000
Operating Mode:
SYNCHRONOUS
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Organization:
1MX8
Package Body Material:
PLASTIC/EPOXY
Package Code:
SOP
Package Equivalence Code:
SOP8,.25
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE
Parallel/Serial:
SERIAL
Programming Voltage:
1.8 V
Seated Height-Max:
1.75 mm
Serial Bus Type:
SPI
Standby Current-Max:
0.000012 A
Supply Current-Max:
0.015 mA
Supply Voltage-Max (Vsup):
3.6 V
Supply Voltage-Min (Vsup):
2.3 V
Supply Voltage-Nom (Vsup):
3 V
Surface Mount:
YES
Technology:
CMOS
Temperature Grade:
INDUSTRIAL
Terminal Form:
GULL WING
Terminal Pitch:
1.27 mm
Terminal Position:
DUAL
Width:
3.9 mm
Write Protection:
HARDWARE/SOFTWARE
AT25PE80-SSHN-T Frequently Asked Questions (FAQs)
The recommended operating voltage range for the AT25PE80-SSHN-T is 2.7V to 3.6V, as specified in the datasheet. However, it's essential to note that the device can tolerate a voltage range of 2.5V to 3.7V for a short duration, but prolonged operation outside the recommended range may affect its performance and reliability.
During power-up, the HOLD pin should be kept high (VCC) until the power supply has stabilized. During power-down, the HOLD pin should be kept low (GND) to prevent any unwanted writes or accesses to the device. It's also recommended to keep the HOLD pin low during reset or brown-out conditions.
The AT25PE80-SSHN-T supports up to 100,000 write cycles per sector, with a total of 16 sectors. This means the device can withstand a total of 1,600,000 write cycles (100,000 cycles/sector * 16 sectors) before its endurance is compromised.
To securely erase the AT25PE80-SSHN-T, use the Chip Erase command (0xC7) followed by a sector erase command (0xD8) for each sector. This will erase all data and security bits, leaving the device in a blank state. It's essential to follow the recommended erase procedure to ensure all data is completely removed.
The WP (Write Protect) pin is used to protect the entire memory array or specific sectors from being written or erased. When the WP pin is tied to VCC, the entire memory array is write-protected. When tied to GND, the device operates normally. To protect specific sectors, use the sector protection commands (0x36 and 0x39) in conjunction with the WP pin.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AT25PE80-SSHN-T Overview
Use the download button to access the AT25PE80-SSHN-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AT25P,
or try a keyword search, such as Flash Memories
