Part Image

AT25XV021A-MAHV-T - Renesas Electronics

Description: The AT25XV021A is a member of our System Enhancing class of code and data storage solutions with an extended operating range up to 4.4V. It is designed for all system memory tasks ranging from boot/code shadowing to data logging and includes the 256-byte page Erase feature that enables efficient, lower energy datalogging.

Download AT25XV021A-MAHV-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AT25XV021A-MAHV-T - Renesas Electronics PCB footprint - Small Outline No-lead - Small Outline No-lead - 8MA3 – UDFN.
click to zoom
3D Models
AT25XV021A-MAHV-T - Renesas Electronics  - 3D model - Small Outline No-lead - 8MA3 – UDFN.
click to zoom

AT25XV021A-MAHV-T Details

  • Manufacturer Part Number:

    AT25XV021A-MAHV-T

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    DFN

  • Package Description:

    UDFN-8

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    5

  • Clock Frequency-Max (fCLK):

    70 MHz

  • Data Retention Time-Min:

    20

  • Endurance:

    100000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-N8

  • Length:

    3 mm

  • Memory Density:

    2097152 bit

  • Memory IC Type:

    FLASH

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    262144 words

  • Number of Words Code:

    256000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    256KX8

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC8,.12,20

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Parallel/Serial:

    SERIAL

  • Programming Voltage:

    1.8 V

  • Seated Height-Max:

    0.6 mm

  • Serial Bus Type:

    SPI

  • Standby Current-Max:

    0.000006 A

  • Supply Current-Max:

    0.0055 mA

  • Supply Voltage-Max (Vsup):

    4.4 V

  • Supply Voltage-Min (Vsup):

    1.65 V

  • Supply Voltage-Nom (Vsup):

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Type:

    NOR TYPE

  • Width:

    2 mm

  • Write Protection:

    HARDWARE/SOFTWARE

AT25XV021A-MAHV-T Frequently Asked Questions (FAQs)

  • The recommended operating voltage range for the AT25XV021A-MAHV-T is 2.7V to 3.6V, as specified in the datasheet. However, it's essential to note that the device can operate down to 2.5V, but with reduced performance and reliability.
  • During power-up, the HOLD# pin should be kept high until the power supply voltage reaches the minimum operating voltage (2.7V). During power-down, the HOLD# pin should be kept low to prevent any unwanted writes or accesses to the device.
  • The AT25XV021A-MAHV-T supports up to 100,000 write cycles per sector, with a total of 4,096 sectors. This means the device can withstand a total of approximately 409,600,000 write cycles (100,000 cycles/sector * 4,096 sectors).
  • To securely erase the AT25XV021A-MAHV-T, use the Chip Erase command (0xC7) followed by a Write Enable command (0x06). This will erase the entire device, including the security registers. Note that this procedure should only be performed when the device is not in use, as it will render all data inaccessible.
  • The WP# (Write Protect) pin is used to prevent writes to the status register and the security registers. When WP# is low, writes to these registers are allowed. When WP# is high, writes are blocked. It's recommended to tie WP# to VCC or use an external pull-up resistor to ensure writes are protected.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AT25XV021A-MAHV-T Overview

Use the download button to access the AT25XV021A-MAHV-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AT25X, or try a keyword search, such as Flash Memories

Parts related to AT25XV021A-MAHV-T

Showing 0 results