Broadcom recommends a 4-layer PCB with a solid ground plane, and to keep the signal traces as short as possible. A good layout should also minimize vias and use 50-ohm impedance-controlled traces.
To ensure reliable operation, it's essential to follow proper thermal management practices, such as providing adequate heat sinking, using thermal interface materials, and keeping the device within its recommended operating temperature range.
The ATF-35143-TR1G has built-in ESD protection, but it's still recommended to follow standard ESD handling procedures when handling the device, such as using an ESD wrist strap or mat, and storing the device in an anti-static bag.
While the ATF-35143-TR1G is designed for 50-ohm systems, it can be used in non-50-ohm systems with proper impedance matching. However, this may require additional circuitry and may affect the device's performance.
The recommended power sequencing for ATF-35143-TR1G is to power up the VCC supply before the VDD supply, and to power down the VDD supply before the VCC supply.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ATF-35143-TR1G Overview
Use the download button to access the ATF-35143-TR1G schematic symbol, PCB footprint, and 3D model.
