ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure stable operation, ROHM recommends using an output capacitor with a low ESR (Equivalent Series Resistance) and a capacitance value between 10uF to 100uF. Additionally, a 1uF to 10uF ceramic capacitor in parallel with the output capacitor can help improve stability.
The maximum allowed voltage on the EN (Enable) pin is 6V. Exceeding this voltage may damage the device. It's recommended to use a voltage divider or a clamp circuit to limit the voltage to 6V or less.
The BU4819F-TR is rated for operation up to 105°C. However, ROHM recommends derating the output current and voltage to ensure reliable operation in high-temperature environments. Consult the datasheet for derating guidelines.
To troubleshoot oscillations or instability issues, check the PCB layout for proper thermal design, ensure the output capacitor is properly selected, and verify that the input voltage is within the recommended range. Also, check for any noise or interference on the input and output lines.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
BU4819F-TR Overview
Use the download button to access the BU4819F-TR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like BU481,
or try a keyword search, such as Power Management Circuits
