The recommended operating voltage range for the CD4060BCM is 3V to 18V, with a typical operating voltage of 5V.
To ensure the oscillator starts reliably, a 1-10uF capacitor should be connected between the oscillator pins (pins 11 and 12) and a 1kΩ to 10kΩ resistor should be connected between the oscillator pin (pin 11) and VDD.
The maximum clock frequency that the CD4060BCM can handle is approximately 1MHz, although this can vary depending on the specific application and operating conditions.
The CD4060BCM counter can be reset by applying a low signal to the reset pin (pin 12) for at least 10ns.
The MR (Master Reset) pin is used to asynchronously reset the counter and oscillator. When the MR pin is low, the counter and oscillator are reset, and the output of the counter is set to zero.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CD4060BCM Overview
Use the download button to access the CD4060BCM schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CD406,
or try a keyword search, such as Counters