A 4-layer PCB with a thermal via array underneath the device is recommended. The thermal vias should be connected to a solid copper plane on the bottom layer to dissipate heat efficiently.
Use a low-loss substrate, minimize trace lengths, and use a 50-ohm transmission line to match the device's output impedance. Also, ensure proper decoupling and bypassing of the power supply lines.
The maximum junction temperature (Tj) is 175°C. However, it's recommended to operate the device at a temperature below 150°C to ensure reliability and minimize thermal stress.
Yes, the CMPA601C025F can be used in a push-pull configuration. However, ensure that the devices are properly matched, and the circuit is designed to minimize even-order harmonics.
The recommended input and output matching networks can be found in the application note or the device's evaluation board documentation. These networks are optimized for maximum power transfer and minimum loss.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CMPA601C025F Overview
Use the download button to access the CMPA601C025F 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CMPA6,
or try a keyword search, such as RF/Microwave Amplifiers
