Description:The Renesas 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The MX82C55A has identical features as the X82C55 with the exception of no bus hold devices on the port pins. It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24 I/O pins which may be individually programmed in two groups of 12 and used in three major modes of operation. The hi
A 4-layer PCB with a solid ground plane and thermal vias is recommended for optimal thermal performance. The datasheet provides a recommended land pattern, but a more detailed layout guide can be found in the Renesas application note 'Thermal Design Guide for CMQ82C55AZ96'.
To ensure reliable operation in high-temperature environments, it is essential to follow the recommended thermal design guidelines, use a suitable thermal interface material, and ensure good airflow around the device. Additionally, consider using a heat sink or a thermal management system to keep the junction temperature below the maximum rating.
The input capacitors should be low-ESR, high-frequency capacitors with a voltage rating of at least 25V. A minimum capacitance of 10uF is recommended, but the optimal value depends on the specific application and input voltage ripple requirements. X7R or X5R dielectric capacitors are suitable for this application.
To troubleshoot issues with the power-on reset circuitry, check the voltage on the VCC pin during power-up, ensure that the POR pin is properly connected, and verify that the reset signal is properly generated. Also, check for any noise or glitches on the power supply lines that may be affecting the POR circuitry.
The output capacitors should be low-ESR, high-frequency capacitors with a voltage rating of at least 2.5V. A minimum capacitance of 4.7uF is recommended, but the optimal value depends on the specific application and output voltage ripple requirements. X7R or X5R dielectric capacitors are suitable for this application.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CMQ82C55AZ96 Overview
Use the download button to access the CMQ82C55AZ96 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like CMQ82,
or try a keyword search, such as Parallel IO Ports
