CRV1S0505SC - Murata Electronics

CRV1S0505SC Frequently Asked Questions (FAQs)

• What is the recommended land pattern for CRV1S0505SC?
  Murata recommends a land pattern with a pad size of 1.3mm x 1.3mm and a spacing of 0.5mm between pads. The recommended land pattern is available in the Murata Land Pattern document.
• Can I use the CRV1S0505SC in a high-temperature environment?
  The CRV1S0505SC is rated for operation up to 125°C, but it's recommended to derate the voltage and current ratings above 85°C. Consult the datasheet and Murata's reliability handbook for more information.
• How do I handle the CRV1S0505SC for soldering and rework?
  Murata recommends using a soldering iron with a temperature of 350°C or less, and a soldering time of 3 seconds or less. For rework, use a hot air rework station with a temperature of 250°C or less, and a rework time of 10 seconds or less.
• What is the equivalent series resistance (ESR) of the CRV1S0505SC?
  The ESR of the CRV1S0505SC is not explicitly stated in the datasheet, but it can be estimated to be around 0.1 ohms based on Murata's general specifications for similar capacitors.
• Can I use the CRV1S0505SC in a high-vibration environment?
  The CRV1S0505SC is designed to withstand vibrations up to 10G, but it's recommended to consult Murata's vibration test report and perform additional testing to ensure the capacitor meets the specific requirements of your application.