Cal Test Electronics recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a signal layer on the top layer. The CT2017-2 should be placed near the edge of the board to minimize signal reflections.
To ensure accurate current measurement, the CT2017-2 should be installed in a way that the primary conductor is centered in the aperture, and the burden resistor should be selected based on the application's specific requirements. Additionally, the CT2017-2 should be calibrated before use.
The CT2017-2 can operate in temperatures ranging from -40°C to 85°C. However, the accuracy and linearity of the current measurement may be affected at extreme temperatures.
The CT2017-2 is designed for low-voltage applications up to 300V. For high-voltage applications, a voltage divider or isolation amplifier may be required to ensure safe and accurate operation.
Common issues with the CT2017-2 include incorrect installation, poor PCB layout, or incorrect burden resistor selection. Troubleshooting should start with verifying the installation and PCB layout, followed by checking the burden resistor value and calibration.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
CT2017-2 Overview
Use the download button to access the CT2017-2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like CT201,
or try a keyword search, such as Other Interconnects
