Part Image

DG441DVZ-T - Renesas Electronics

Description: The DG441 and DG442 monolithic CMOS analog switches are drop-in replacements for the popular DG201A and DG202 series devices. They include four independent single pole single throw (SPST) analog switches, TTL and CMOS compatible digital inputs, and a voltage reference for logic thresholds. These switches feature lower analog ON resistance (

Download DG441DVZ-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DG441DVZ-T - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - 16 Ld TSSOP_
click to zoom
3D Models
DG441DVZ-T - Renesas Electronics  - 3D model - Small Outline Packages - 16 Ld TSSOP_
click to zoom

DG441DVZ-T Details

  • Manufacturer Part Number:

    DG441DVZ-T

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSSOP

  • Package Description:

    TSSOP-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    M16.173

  • Country Of Origin:

    Mainland China, Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    7

  • Additional Feature:

    IT CAN ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    5 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO

  • Number of Channels:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    60 dB

  • On-state Resistance-Max (Ron):

    85 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.2 mm

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    120 ns

  • Switch-on Time-Max:

    250 ns

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    4.4 mm

DG441DVZ-T Frequently Asked Questions (FAQs)

  • A good PCB layout for the DG441DVZ-T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, using a low-ESR capacitor for the VCC pin and a 0.1uF bypass capacitor for the VREF pin can help reduce noise and EMI.
  • To ensure proper power-up and initialization, make sure to follow the recommended power-up sequence: VCC, VREF, and then the analog input signals. Also, ensure that the VCC and VREF pins are decoupled with a 0.1uF capacitor and that the device is operated within the recommended temperature range.
  • The maximum allowable voltage on the analog input pins is VCC + 0.3V. Exceeding this voltage can cause damage to the device. It's recommended to use input protection circuits, such as voltage dividers or clamping diodes, to prevent overvoltage conditions.
  • In the event of a latch-up condition, power down the device and then reapply power following the recommended power-up sequence. If the latch-up persists, check for any voltage exceeding the maximum ratings, and ensure that the device is operated within the recommended temperature range.
  • The recommended method for soldering the DG441DVZ-T is to use a reflow soldering process with a peak temperature of 260°C (500°F) for a maximum of 10 seconds. Hand soldering is not recommended due to the device's small size and lead-free finish.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DG441DVZ-T Overview

Use the download button to access the DG441DVZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DG441, or try a keyword search, such as Multiplexers or Switches

Parts related to DG441DVZ-T

Showing 0 results

DG441DVZ-T Alternates

Showing results

Image Part Number Model
Part Image DG211CUE+ Analog Devices Inc

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG201AEUE Analog Devices Inc

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG211CUE+T Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG441DVZ-T Intersil Corporation

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG211EUE+T Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

For a full list of alternate parts for DG441DVZ-T, check out Findchips.com