ROHM recommends a thermal pad size of 2.5mm x 2.5mm with a minimum of 10 thermal vias (0.3mm diameter) to ensure efficient heat dissipation. Additionally, a solid copper plane on the bottom layer can help to further reduce thermal resistance.
The DTC123YU3HZGT106 requires a bias voltage of 2.5V to 5.5V on the VCC pin, with a recommended operating current of 1mA to 10mA. Ensure that the bias voltage is stable and noise-free to prevent oscillations or instability.
The maximum power dissipation for the DTC123YU3HZGT106 is 250mW. Exceeding this limit can cause the device to overheat, leading to reduced performance or even damage.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input and output pins to prevent damage from electrostatic discharge. Additionally, follow proper handling and storage procedures to minimize the risk of ESD damage.
ROHM recommends storing the DTC123YU3HZGT106 in a dry, cool place with a temperature range of -20°C to 40°C and humidity below 60%. Avoid exposing the device to extreme temperatures, humidity, or physical stress during storage.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTC123YU3HZGT106 Overview
Use the download button to access the DTC123YU3HZGT106 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTC12,
or try a keyword search, such as Small Signal Bipolar Transistors
