Description:The F2972 is a single-pole double-throw (SP2T) reflective RF switch featuring high linearity and wide bandwidth. This device is optimized from 5MHz to 1.8GHz to support downstream cable modem future migration for DOCSIS 3.1 applications, and operates at up to 10GHz to support a multitude of wireless RF applications. Superb performance is achieved when used in either 50Ω or 75Ω terminating impedance applications.
Renesas provides a recommended PCB layout guide in their application note (R01AN2732EU0100) that includes thermal design considerations, such as placing thermal vias under the package and using a thermal pad on the bottom side of the PCB.
Renesas provides a Secure Boot and Firmware Encryption Guide (R01AN2733EU0100) that outlines the steps to implement secure boot and firmware encryption using the MCU's built-in security features, such as the Trusted Secure IP (TSIP) and the Advanced Encryption Standard (AES).
The F2972NEGK's ADC has a 12-bit resolution and a maximum sampling rate of 1.2 Msps. According to the datasheet, the ADC has an accuracy of ±1 LSB and a noise tolerance of 50 mV. However, for more accurate measurements, it's recommended to use an external ADC or to implement noise reduction techniques, such as oversampling and averaging.
No, the F2972NEGK's USB interface can only operate in either device mode or host mode, but not both simultaneously. However, you can implement a USB OTG (On-The-Go) controller using an external USB OTG chip or a dedicated USB OTG IC.
Renesas provides a Power Management Guide (R01AN2734EU0100) that outlines various techniques to optimize power consumption, such as using the MCU's low-power modes (e.g., sleep, standby, and shutdown), reducing clock frequencies, and using power gating for peripherals.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
F2972NEGK Overview
Use the download button to access the F2972NEGK schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like F2972,
or try a keyword search, such as RF/Microwave Switches
