Description:600 V - 60 A 2-Phase Bridgeless PFC with Integral Gate Driver and Protection; Built-in Shunt Resistor for Current Sensing; Isolation Rating: 2500 Vrms/min.; Built-in NTC Thermistor for Temperature Monitoring; UL Certified No. E209204 (UL1557); Optimized for 20kHz Switching Frequency; Very Low Thermal Resistance Using AlN DBC Substrate
The maximum junction temperature for the FPDB60PH60B is 150°C. Exceeding this temperature can lead to reduced performance and lifespan.
Proper cooling can be achieved by using a heat sink with a thermal resistance of 1°C/W or lower, and ensuring good airflow around the device. A thermal interface material (TIM) can also be used to improve heat transfer.
The recommended gate drive voltage for the FPDB60PH60B is between 10V and 15V. This ensures proper switching and minimizes power losses.
Yes, the FPDB60PH60B can be used in a parallel configuration to increase current handling capability. However, it's essential to ensure that the devices are properly matched and that the gate drive signals are synchronized to prevent uneven current sharing.
The maximum dv/dt rating for the FPDB60PH60B is 10kV/μs. Exceeding this rating can lead to premature failure or malfunction.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
FPDB60PH60B Overview
Use the download button to access the FPDB60PH60B 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like FPDB6,
or try a keyword search, such as Motion Control Electronics
