Description:This CMOS analog switch offers low-resistance switching performance for analog voltages up to the supply rails and for signal currents up to 70mA. “ON” resistance is low and stays reasonably constant over the full range of operating signal voltage and current. RON remains exceptionally constant for input voltages between +5V and -5V and currents up to 50mA. Switch impedance also changes very little over temperature, particularly between 0°C and +75°C. RON is nominally 25Ω for the HI-5046A/883. This device p
Renesas provides a recommended PCB layout guide in their application note AN9711, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize noise.
The HI1-5046A/883 has a thermal pad that must be connected to a thermal plane on the PCB to dissipate heat. Renesas recommends using a thermal interface material (TIM) and a heat sink to keep the junction temperature below 150°C. A thermal analysis should be performed to ensure the design meets the thermal requirements.
Renesas recommends a specific power-up sequence to ensure proper operation of the device. The sequence is: VCC, then VDD, then VEE, and finally the input signals. This sequence helps prevent latch-up and ensures the device is properly biased.
Renesas provides a troubleshooting guide in their application note AN9712, which includes steps to identify and resolve common issues such as output voltage errors, oscillations, and thermal shutdown. Additionally, Renesas offers technical support and evaluation boards to help debug and optimize designs.
The HI1-5046A/883 is designed to meet the requirements of MIL-PRF-38535, which includes radiation hardness and reliability testing. Renesas provides detailed radiation and reliability data in their datasheet and application notes, including total dose irradiation, single event effects, and burn-in testing.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
HI1-5046A/883 Overview
Use the download button to access the HI1-5046A/883 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like HI1-5,
or try a keyword search, such as Multiplexers or Switches
