Please enter a minimum 3 letters or numbers
Technical Content
Part Image

HIP4080AIPZ - Renesas Electronics

Description: The HIP4080A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4080A includes an input comparator, used to facilitate the hysteresis and PWM modes of operation. Its HEN (high enable) lead can force current to freewheel in the bottom two external power MOSFETs, maintaining the upper power MOSFETs off. Since it can switch at frequencies up to 1MHz, the HIP4080A is well suited for driving Voice Coil Motors, switching power amplif

Download HIP4080AIPZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
HIP4080AIPZ - Renesas Electronics - PCB symbol
click to zoom
PCB Footprints
HIP4080AIPZ - Renesas Electronics PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - E20.3
click to zoom
3D Models
HIP4080AIPZ - Renesas Electronics - 3D model - Dual-In-Line Packages - E20.3
click to zoom

HIP4080AIPZ Details

  • Manufacturer Part Number:

    HIP4080AIPZ

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    PDIP

  • Package Description:

    DIP-20

  • Pin Count:

    20

  • Manufacturer Package Code:

    E20.3

  • Country Of Origin:

    Malaysia, Philippines, Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    6

  • High Side Driver:

    YES

  • Input Characteristics:

    GATED SCHMITT TRIGGER

  • Interface IC Type:

    FULL BRIDGE BASED MOSFET DRIVER

  • JESD-30 Code:

    R-PDIP-T20

  • JESD-609 Code:

    e3

  • Length:

    25.895 mm

  • Number of Functions:

    1

  • Number of Terminals:

    20

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Characteristics:

    STANDARD

  • Output Peak Current Limit-Nom:

    2.6 A

  • Output Polarity:

    TRUE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP20,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Seated Height-Max:

    5.33 mm

  • Supply Current-Max:

    15 mA

  • Supply Voltage-Max:

    15 V

  • Supply Voltage-Min:

    9.5 V

  • Supply Voltage-Nom:

    12 V

  • Supply Voltage1-Max:

    95 V

  • Supply Voltage1-Min:

    10 V

  • Supply Voltage1-Nom:

    12 V

  • Surface Mount:

    NO

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Turn-off Time:

    0.11 µs

  • Turn-on Time:

    0.14 µs

  • Width:

    7.62 mm

HIP4080AIPZ Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the high-current paths short and use a Kelvin connection for the sense resistors. Refer to the application note 'HIP4080AIPZ PCB Layout Guidelines' for more details.
  • To optimize the HIP4080AIPZ for high-frequency operation, use a low-ESR output capacitor, minimize the inductor's DC resistance, and ensure the PCB layout is optimized for high-frequency operation. Additionally, consider using a shielded inductor and a common-mode choke to reduce EMI.
  • The maximum allowed voltage on the VIN pin is 25V, but it's recommended to keep it below 20V to ensure reliable operation and to prevent damage to the internal voltage regulator.
  • To ensure stability, ensure the output capacitor has a low ESR, the inductor has a low DC resistance, and the PCB layout is optimized for high-frequency operation. Additionally, add a small capacitor (e.g., 10nF) between the VIN and GND pins to filter out high-frequency noise.
  • The HIP4080AIPZ has a thermal pad that should be connected to a solid ground plane or a thermal relief pattern on the PCB. Ensure good airflow around the device and consider using a heat sink or thermal interface material to reduce the thermal resistance.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

HIP4080AIPZ Overview

Use the download button to access the HIP4080AIPZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like HIP40, or try a keyword search, such as MOSFET Drivers

Parts related to HIP4080AIPZ

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

HIP4080AIPZ Alternates

Showing results

Image Part Number Model
Part Image HIP4080AIPZ Intersil Corporation

Full Bridge Based MOSFET Driver, 1.4A, PDIP20
Part Image HIP4080AIP Intersil Corporation

Full Bridge Based MOSFET Driver, 1.4A, MOS, PDIP20
Part Image HIP4080IP Renesas Electronics Corporation

Full Bridge Based MOSFET Driver, 2.6A, PDIP20