Part Image

HIP4083ABZ - Renesas Electronics

Description: The HIP4083 is a three-phase high side N-channel MOSFET driver, specifically targeted for PWM motor control. Two HIP4083 may be used together for 3 phase full bridge applications (see application block diagram). Alternatively, the lower gates may be controlled directly from a buffered microprocessor output. Unlike other members of the HIP408x family, the HIP4083 has no built-in turn-on delay. Each output (AHO, BHO and CHO) will turn-on 65ns after its input is switched low. Likewise, each output will turn-of

Download HIP4083ABZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
HIP4083ABZ - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - M16.15
click to zoom
3D Models
HIP4083ABZ - Renesas Electronics  - 3D model - Small Outline Packages - M16.15
click to zoom

HIP4083ABZ Details

  • Manufacturer Part Number:

    HIP4083ABZ

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOICN

  • Package Description:

    SOIC-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    M16.15

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • High Side Driver:

    YES

  • Input Characteristics:

    STANDARD

  • Interface IC Type:

    HALF BRIDGE BASED MOSFET DRIVER

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    9.9 mm

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Characteristics:

    PUSH-PULL

  • Output Peak Current Limit-Nom:

    0.3 A

  • Output Polarity:

    TRUE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    3 mA

  • Supply Voltage-Max:

    15 V

  • Supply Voltage-Min:

    7 V

  • Supply Voltage-Nom:

    12 V

  • Supply Voltage1-Max:

    95 V

  • Supply Voltage1-Nom:

    12 V

  • Surface Mount:

    YES

  • Terminal Finish:

    MATTE TIN

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Turn-off Time:

    0.09 µs

  • Turn-on Time:

    0.1 µs

  • Width:

    3.9 mm

HIP4083ABZ Frequently Asked Questions (FAQs)

  • A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. Keep the switching node (SW) away from sensitive analog nodes and ensure good thermal conduction to the heat sink.
  • Use a combination of ceramic and electrolytic capacitors for the output filter. Choose capacitors with low ESR and high ripple current ratings. Optimize the inductor value and type for the specific application.
  • Choose a capacitor with low ESR, high ripple current rating, and a voltage rating that exceeds the maximum input voltage. Ensure the capacitor is placed close to the VIN pin and connected to a low-impedance ground plane.
  • Use a soft-start circuit to limit the inrush current during start-up. Ensure the input voltage rises slowly and monotonically. Use a voltage supervisor or reset circuit to ensure the converter is fully enabled before applying the output voltage.
  • Keep the switching node (SW) and output voltage (VOUT) traces short and away from sensitive analog nodes. Use a shielded inductor and keep the input and output capacitors close to the IC. Ensure good grounding and decoupling of the IC.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

HIP4083ABZ Overview

Use the download button to access the HIP4083ABZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like HIP40, or try a keyword search, such as MOSFET Drivers

Parts related to HIP4083ABZ

Showing 0 results

HIP4083ABZ Alternates

Showing results

Image Part Number Model
Part Image HIP4083ABZT Intersil Corporation

Half Bridge Based MOSFET Driver, 0.3A, MOS, PDSO16

Part Image HIP4083ABZ Intersil Corporation

Half Bridge Based MOSFET Driver, 0.3A, MOS, PDSO16

Part Image HIP4083ABZT Renesas Electronics Corporation

Half Bridge Based MOSFET Driver, 0.3A, MOS, PDSO16