Description:The HIP4086 and HIP4086A (referred to as the HIP4086/A) are 3-phase N-channel MOSFET drivers. Both parts are specifically targeted for PWM motor control. These drivers have flexible input protocol for driving every possible switch combination. The user can even override the shoot-through protection for switched reluctance applications. The HIP4086/A have a wide range of programmable dead times (0. 5μs to 4. 5μs) which makes them very suitable for the low frequencies (up to 100kHz) typically used for motor d
The datasheet provides some general guidelines, but for optimal thermal performance, it's recommended to follow a 2-layer or 4-layer PCB layout with a solid ground plane on the bottom layer, and to place thermal vias under the IC to dissipate heat efficiently.
To ensure reliable startup and shutdown, make sure to follow the recommended power-up and power-down sequences, and add a soft-start circuit to limit the inrush current. Also, ensure that the input voltage rises monotonically and does not droop during startup.
Although the datasheet doesn't specify a maximum voltage, it's recommended to keep the bootstrap capacitor voltage below 10V to prevent damage to the internal bootstrap diode. Exceeding this voltage may reduce the IC's reliability.
While a lower-value bootstrap capacitor may work, it's not recommended as it may cause the high-side FET to turn off prematurely, leading to reduced efficiency and potential reliability issues. Stick to the recommended 1nF to 10nF range for optimal performance.
To troubleshoot oscillations or instability, check the PCB layout for noise coupling, ensure proper decoupling of the input and output capacitors, and verify that the feedback network is properly compensated. Also, check for component tolerances and ensure that the design meets the recommended operating conditions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
HIP4086ABT Overview
Use the download button to access the HIP4086ABT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like HIP40,
or try a keyword search, such as MOSFET Drivers
