HSMG-C191 footprint, schematic symbol and 3D model by Avago Technologies

Symbol

PCB Footprints

3D Models

HSMG-C191 Details

Manufacturer Part Number:
HSMG-C191
Pbfree Code:
Yes
Rohs Code:
Yes
Part Life Cycle Code:
Active
Package Description:
1.60 X 0.80 MM, 0.60 MM HEIGHT, LEAD FREE, PLASTIC PACKAGE-2
Reach Compliance Code:
Compliant
HTS Code:
8541.40.20.00
Manufacturer:
Avago Technologies
YTEOL:
7
Additional Feature:
SUPPORTS INFRARED
Color:
GREEN
Color@Wavelength:
Green
Configuration:
SINGLE
Forward Current-Max:
0.02 A
Forward Voltage-Max:
2.6 V
JESD-609 Code:
e4
Lens Type:
UNTINTED DIFFUSED
Luminous Intensity-Min:
0.0045 cd
Luminous Intensity-Nom:
15.0 mcd
Mounting Feature:
SURFACE MOUNT
Number of Functions:
1
Number of Terminals:
2
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Optoelectronic Device Type:
SINGLE COLOR LED
Overall Height:
0.6 mm
Packing Method:
TR, 7 INCH
Peak Wavelength:
570 nm
Reverse Voltage-Max:
5 V
Shape:
RECTANGULAR
Size:
1 mm
Surface Mount:
YES
Terminal Finish:
Gold (Au) - with Nickel (Ni) barrier
Terminal Pitch:
1.3 mm
Viewing Angle:
170 deg

Broadcom recommends a 4-layer PCB with a solid ground plane and thermal vias to dissipate heat. A thermal pad on the bottom of the package should be connected to a thermal plane on the PCB.
Use a low-dropout regulator (LDO) with a high power supply rejection ratio (PSRR) to minimize noise and ripple. Ensure the power supply can deliver the required current and voltage (1.2V, 3.3V, and 1.8V) with minimal voltage droop.
Use a single 25MHz crystal oscillator as the clock source, and use the internal phase-locked loop (PLL) to generate the required clock frequencies. Ensure the clock signal is clean and has minimal jitter.
Use controlled impedance traces, add decoupling capacitors, and ensure signal return paths are short and direct. Implement EMI mitigation techniques such as shielding, filtering, and grounding to minimize radiation.
Use Broadcom's SDK and development tools, such as the WICED Studio IDE, to develop and debug firmware. Utilize the chip's built-in debug features, such as JTAG and UART, to troubleshoot and optimize code.

Expert Contribution

System Verified

Community Approved

Use the download button to access the HSMG-C191 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like HSMG-, or try a keyword search, such as Visible LEDs

If you searched for HSMG-C191, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	HSMG-C191 Broadcom Limited Single Color LED, Green, Untinted Diffused, 1mm
	HSMG-C190 Broadcom Limited Single Color LED, Green, Untinted Diffused, 1mm
	HSMG-C190 Avago Technologies SINGLE COLOR LED, GREEN, 1mm, 1.60 X 0.80 MM, 0.80 MM HEIGHT, LEAD FREE, PLASTIC PACKAGE-2
For a full list of alternate parts for HSMG-C191, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →